In order to estimate the cost of a center-pivot irrigation system, we have prepared the following questions. All the blanks should be filled in.

If any field is not detailed, (except required ones), our Technical Department will choose the most accurate option. Once completed, we will reply as soon as possible.

---

CONTACT DETAILS [*Required]

---

E-Mail

Name

Address

City

Country

Telephone

MACHINE DETAILS

Available flow - GPM or m3/h

Available pressure at the Pivot base - PSI or Bar

Main pipe diameter - 5″ (127mm) or 6 5/8″ (168mm)

Spacing: standard (2,9 mts) or special (1,9 mts)?

Is the soil uneven or flat? Slope in ascent from center to the highest irrigated point?

Machine height – standard or high profile (for trees or sugar cane)

Fixed Pivot or towable option (to water more than one plot)? [*Required]

ANSWER YES or NO

Pressure switch for low pressure shutdown?

Thermostat switch for low temperature shutdown?

Stop in slot and end gun control on Pivot Point?

Auto reverse? On Pivot point or end tower for safety? Need barricades? [*Required]

PIVOT RADIUS

[*Required, if a farm map is not possible]

1 – Maximum radius to the last wheel

2 – Total radius of the center-pivot (including overhang up to 25 meters maximum)

3 – Total irrigated radius (including end gun scope)

AUXILIARY EQUIPMENT

Standard steel pipe or use high density polyethylene as liner for pipes?

Standard or modified alignment option?

Standard or thicker electrical cable option?

Standard or high speed motors?

Wheels: 14.9 x 24  or  11.2 x 38 [*Required]

End gun: P85 (15 meters effective range) or SR100 (maximum range)

Sprinklers: Spray, R3000 Rotator, i-Wob [*Required]

ANSWER YES or NO

Over load option for tower box?

3mm tickness pipe option?

Polyethylene motor cover? (for safety)

Running light?

Remote drain? (drains the spans through sprinklers away from the drive units)

Dry wheel tracks with simple extension on tower? (keeps wheels dry for better traction)

End gun with booster pump?

Drops? (to reduce evaporation and wind drift losses) standard or dual clearance drop kit? [*Required]

Pressure regulators in every output?

Fertigation pump?

Flowmeter? (to control water consumption)